Autowatch Ghost Immobiliser
The renowned Ghost Immobiliser provides your vehicle with advanced protection against key-cloning, hacking and theft. This TASSA-certified system is not detected by thieves and stops your vehicle from starting.
This silent device makes use of buttons on your car's steering wheel as well as the door panels and the centre console to let you create a unique, PIN code that you can change up to 20 characters that must be entered first before the car is able to start.
Easy to install
It is more important than ever to secure your vehicle. With car thefts increasing and cloning tools readily available, it is essential to take precautions. Our Autowatch Ghost immobiliser provides a secure, efficient and affordable solution to protect against key cloning and vehicle theft. It is virtually undetectable to thieves and operates through buttons on the steering wheel, door panels or centre console. This allows customers to create a unique disarming sequence similar to a credit card that must be entered before the vehicle can be driven or started away. This makes the system virtually impossible to identify and is unaffected by jamming or spoofing devices that are used in other systems available.
The installation of the Ghost unit is a highly specialised procedure that must only be done by an approved installer. The unit is carefully integrated into the vehicle's network of CAN buses and ensures that it is directly connected to the ECU. The Ghost can be installed without affecting the factory settings, and it is not possible for thieves to bypass the system using signal boosters.
Once the Ghost is fitted with a new and improved sequence to disarm must be entered to turn on your vehicle. Press the service button 5 times in a matter of 2 seconds, but ensure you don't press it for too long. The system will then blink twice to signal that Transport Mode has been activated. This feature is perfect for classic, sports or high-end vehicles that require to have their security system temporarily disabled during transport or maintenance.
Once Transport Mode is activated, the immobiliser is turned off and is not reactivated by entering your PIN code again. This feature is great for those who would like to store their vehicle over the winter months, thus preventing it from being stolen by thieves or having to pay monthly increases in insurance premiums.
There are no key-fobs, LEDs or other indicators to reveal the location of the vehicle.
The Ghost immobiliser is a discrete device that shields your joy and pride from car thieves by utilizing buttons on the dashboard or steering wheel to input a discreet pin code prior to starting the engine. It wards off attacks using signal relays, ECU swapping and key cloning. It can also be linked to a phone application to arm or disarm remotely. It's easy to install and can be integrated to a variety of vehicles. It's also extremely discreet and can be concealed in hard-to-reach places like behind the dashboard or within the trim of the steering wheel.
It's a great option for cars with high performance because it will disable the ignition of the vehicle when an incorrect pin code is entered, preventing thieves from driving off with your pride and joy. The device will even send an alert to your phone if you've left the car without a key in public areas, providing you with peace of mind while you're away from your vehicle.
The Ghost is unique to other immobilisers in that it doesn't require any additional fobs or LED indicators. It is also able to be concealed in a hard-to-find area of your vehicle. It is extremely resistant to detection since it is directly connected to the CAN data network of your vehicle. It also doesn't emit any radio signals, making it undetectable by RF scanners or signal jammers.
It's made to be tamperproof and weatherproof, and is able to endure extreme temperatures. It is also unaffected by tampering with by cutting wires or dismantling the device. It's also inaccessible to organized gangs of thieves that utilize diagnostics-reading equipment to detect security systems. It's not affected by diagnostic equipment that checks the CAN data for the presence or absence of a security system.
No circuit cuts
The ghost device doesn't have any LED indicators or key fobs to identify its whereabouts. It is hidden under the steering wheel or dashboard of your vehicle and uses buttons to generate an unique PIN sequence that has to be entered to start the engine. The thief cannot drive away the vehicle even when they have your keys since they do not know the correct code. The device doesn't transmit radio signals, so organized gangs of thieves who use tools for reading diagnostics will be not able to detect it.
This advanced immobiliser, that is also TASSA-approved, will aid in reducing the cost of insurance. This is particularly relevant to vehicles that their owners have customised. It also stops key theft and ECU switching, meaning that the only possible way for a burglar to take your joy and happiness is to take it away. it.
As the system does not use the factory key fobs or dashboard buttons, it is a completely silent device, it communicates with your ECU via the CAN data circuit which operates completely silently and doesn't even indicate that it's fitted. This means that a burglar can't replace the ECU or even add new key fobs to get your car running.
Should you ever forget your PIN code, our engineers provide you with an emergency reset option for the device, which allows you to enter 'service mode'. This will allow dealers or technicians to temporarily start and drive your vehicle and perform maintenance work, MOTs or valet parking. When the technician is finished their job or you've removed your vehicle, simply enter the PIN code and the device will go out of service mode dependent on speed and duration.
No radio signals
The Ghost immobiliser, unlike many other car security systems is not dependent on alarm systems or key fobs to stop vehicles from getting started. It communicates with the vehicle's ECU, CAN data circuit and other circuits to prevent the engine starting. This makes it a quiet solution that is not affected by key cloning or RF scanning techniques employed by thieves to bypass other security devices. It can be combined with tracking devices to enhance the security of your vehicle. You will also be alerted if there is a chance to steal or alter the security of your vehicle.
The Autowatch Ghost, a TASSA certified device, is affixed to insurance and offers superior protection against key hacking and cloning. It is controlled by an app for mobile devices and is secured to protect. It comes with a secure emergency PIN override. It's a safe cost-effective, private and discreet way to safeguard your vehicle from theft.
However, the Ghost is not without problems. One common issue is that users have difficulty to find the correct disarm sequence. This is because the device requires input through buttons already in your vehicle, like those on the steering wheel or center console. This isn't easy for drivers to remember, or they might be wrong the first time around. It is recommended to read the instruction manual that comes with the device and practice the disarming procedure prior to driving.
Another issue is that some vehicles have issues with the CAN data connection, which could affect the functionality of the Ghost. ghost 2 immobiliser review could be caused by faulty sensors or a damaged OBD port. It is recommended to check the system before using it, in the event that the CAN connector has any issues.
Change PIN code easily
The Ghost is a fantastic device that has taken the market by storm but the process of changing pin codes can be a bit confusing. The device is pre-programmed by the installer when it's installed but sometimes customers might prefer to change their pin code for different reasons such as they'd prefer an alternative button to disable the device and they don't want the installer to know, or they just simply don't like their current pin number. The good news is that the switching to a different pin number is extremely simple. Follow the steps below to find out how.
Please note that you will need to turn the ignition on but DO NOT start your vehicle! ghost 2 immobiliser cost takes a few seconds to complete. The vehicle will then return to normal operation.